生銹的銅關公應該怎么處理

銅關公常常被用于家里、關公廟、和關公相關的一些地方。那么，銅關公生銹了怎么處理？怎么辦才能更亮呢？下面，就一起來看一下。

Copper Guan Gong is often used at home, Guan Gong temple and some places related to Guan Gong. So, how to deal with the rust of Tongguan? What can I do to make it brighter? Next, let's take a look.

1、可取一小粒草酸放在銹漬處，滴上幾滴溫水，輕輕揉擦，然后再用清水洗干凈。注意操作要快，避免腐蝕。

1. Put a small grain of oxalic acid on the rust stain, drop a few drops of warm water, gently rub it, and then wash it with clean water. Pay attention to fast operation to avoid corrosion.

2、如有鮮檸檬，可榨出其汁液滴在銹漬上揉擦之，反復數次，直至銹漬除去，再用肥皂水洗凈。

2. If there is fresh lemon, squeeze out its juice, drop it on the rust stain, rub it several times, until the rust stain is removed, and then wash it with soapy water.

3、用10%的醋酸液揩拭銹漬，或?qū)⒄次鄄糠纸菰诖姿嵋豪?，第二天再用清水漂洗干凈?/span>

3. Wipe the rust stain with 10% acetic acid solution, or soak the contaminated part in acetic acid solution, and rinse it with clean water the next day.

4、用10%的檸檬溶液或10%的草酸溶液將銹漬處潤濕，然后泡入濃鹽水中，第二天洗滌漂凈。

4. Wet the rust stain with 10% lemon solution or 10% oxalic acid solution, then soak it in concentrated brine, wash and rinse it the next day.

5、用放置幾天的淘米水浸泡幾個小時后洗即可!除銹后，一定記得要在其表面涂薄薄的一層油，或凡士林。這樣可以保持除銹后的成果。

5. Soak it in rice washing water for several days and wash it after a few hours! After rust removal, be sure to apply a thin layer of oil or Vaseline on its surface. In this way, the results after rust removal can be maintained.